Manual Book Access Control Centrix

Programming menu

Menu No	Menu Description	Default Values
1	change lock tes code	2580
2	change auxillari test code	0.852
3	change programming code	1234
4	change normal/secure code	3838
5	change normal/bypass code	-
6	change door activation time	4
0	return to factory default	1234

Programming mode

Enter programming mode ## 1234 (## means pressing # for 3 seconds)

Menu 0 – reset to factory default settings

key entry	resault
## 1234-0-1234	reset to factory defaults with 4-digit code length

Menu  1 – changes the lock output test code 1

key entry	resault
## 1234-1-9360	sets the lock output test code 1 to 9360

Menu 2 – changes the lock output test code 2

key entry	resault
## 1234-2-7481	Sets the lock output test code 2 to 7481

Menu 3 – changes the programming code

key entry	resault
## 1234-3-3748	Sets the programming code to 3748

Menu 4 – changes the normal/secure code

key entry	resault
## 1234-4-4856	Sets the normal / secure code to 4856
## 1234-4-0000	Disables secure mode

Menu 5 – changes the normal / bypass code

key entry	resault
## 1234-5-6754	Sets bypass code to 6754 with door chime enable (last digit greater than zero)
## 1234-5-6750	Sets the bypass code to 6750 with door chime disabled (last digit equal to zero)
##1234-5-0001	Disables bypass mode with door chime enabled
##1234-5-0000	Disables bypass mode and door chime

Menu 6 – set the lock

key entry	resault
## 1234-6-0015	Sets the lock open time to 15 seconds with relay set to fail secure (1st digit) and sirene disabled (2nd digit)
## 1234-6-1215	Sets the lock open time to 15 seconds with relay set to fail safe (1st digit) and siren for 2 min (2nd digit)

Menu 7 – adds user codes

key entry	resault
## 1234-7-001-3456##	Adds single user, sets code 3456 to user number 001
## 1234-7-039-5678-458-6789##	Adds non-sequential users, sets code 5678 to user number 039, and then sets code number 6789 to user number 458
##1234-7-275-3636#3344	Adds sequential users, sets code 3636 to user number 275, and then sets code number 3344 to user number 276
##1234-7-000-5656-6754##	Adds secondary code 6754 to user with primary code 5656

Menu 8 – deletes user codes

key entry	resault
## 1234-8-005-1234	Deletes user number 005
## 1234-8-000-3456-1234	Deletes user with code 3456

Tambahan settingan :

##1234-6-1005 : untuk mereset keypad

##1234-6-1105 : setting dari NO to NC

##1234-6-0005 : setting dari NC to NO

Reset mesin access door dengan cara tekan tombol button cabut adaptor dan nyalahkan kembali dan jangan lepas button setelah sepuluh detik.